Home / Products / Amplifiers / Overview
MA3200 - 2U Professional Power Amplifier
  • Calibrated input attenuators
  • Signal present, Maximum power and Protection
  • 35mm TRS jack paralleled balanced inputs
  • Mode selector (Parallel, Stereo or Bridge)
  • Anti-clipping compressor and Earth-lift switches
  • Stereo 8Ω: 2x 800W
  • Bridge 4Ω: 3200W
  • Frequency Response (half power): 15Hz - 25.000Hz (+0 / -1dB)
  • Damping Factor 1kHz at 8Ω: >400:1
  • Input Impedance: 10kΩ balanced to ground
The supply
The MA series power supply uses high-current toroidal transformers and a huge capacitor bank to ensure an uncommonly high amount of stored energy. This makes a critical difference in sound quality allowing incredible transient response and speakers motion control, even when driving 2Ω loads.

The audio performance
To achieve its remarkable sound quality, the NEXT MA series output circuits were engineered as a high bandwidth, very low bias and feedback class AB or H (MA3200 andMA3800), using the highest grade linear output devices. This approach yields outstanding studio-quality sound accuracy and detail.
Output Power (RMS)
  • Stereo 8Ω:
  • 2x 800W
  • Stereo 4Ω:
  • 2x 1200W
  • Stereo 2Ω:
  • 2x 1600W
  • Bridge 8Ω:
  • 2400W
  • Bridge 4Ω:
  • 3200W
Inputs and Outputs
  • Input Sensitivity:
  • Selectable (0.77V / 1.0V / 1.44V)
  • Input Impedance:
  • 10kΩ balanced to ground
  • Input Connectors:
  • Female XLR-3 and 6,35 TRS jack
  • Output Connectors:
  • 4 pole Speakon and binding posts
Audio Performance
  • Frequency Response (half power):
  • 15Hz - 25.000Hz (+0 / -1dB)
  • THD+N at 1kHz (half power):
  • <0.035%
  • IMD 60Hz and 7kHz, 4:1:
  • <0.02%
  • Signal to Noise Ratio:
  • >105dB
  • Slew Rate (Input Filter Limited):
  • 40V/uS
  • Damping Factor 1kHz at 8Ω:
  • >400:1
  • Amplifier Topology:
  • Class H
  • Protections:
  • Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
  • LED Indicators (Per Channel):
  • Active, signal, limit, protect
  • Panel Controls:
  • Front: 2 input attenuators | Rear: Ground lift, mode selection, compressor
  • Cooling:
  • Front to back via 2 variable speed fans
  • Power Requirements:
  • 230VAC, 50Hz-60Hz (others by request)
  • Dimensions (WxDxH):
  • 483mm x 465mm x 88,8mm (19.02 x 18.31 x 3.46in)
  • Net Weight:
  • 23.2kg (51.1lb)
  • Shipping Weight:
  • 24.8kg (54.7lb)
NEXT-proaudio 2005-2021. All rights reserved.
To leverage user experience, this site uses cookies. By scrolling this page, or closing this message, you are accepting its usage. ×